Sea-Crop is an organic sea mineral concentrate which contains 90 elements and a broad spectrum of beneficial organic compounds which work synergistically to provide crops with the micronutrients that they need for maximum health. Additionally, Sea-Crop strengthens the microbial community within the soil to improve tilth, nutrient uptake, and generally healthier soils.
Legal Product Registered States
California, Colorado, Florida, Idaho, South Dakota, Washington
Solution to Resolve
Sea-Crop provides a broad variety of micronutrients which increase the metabolic efficiency of the plant, helping it to reach its genetic potential and enabling it to defend itself against a wide variety of stressors and pests.
Sea-Crop will bed degraded by long term UV exposure and freezing. Product is best stored out of direct sunlight and prevented from exposure to freezing conditions.
SEA-CROP® is a concentrate that contains all of the wonderful goodness of seawater in concentrated form but with the sodium chloride 95% reduced.
A gallon of SEA-CROP® concentrate makes 100 gallons of SEA-CROP® ready for application.
The product must be diluted before application.
Use at a concentration of 1% to 2% strength. One gallon of SEA-CROP® added to 49 gallons of water equals a 2% solution. Five tablespoons of SEA-CROP® (two and a half ounces) per gallon of water equals a 2% solution.
Diluted SEA-CROP® can be used as a soil drench. Use a minimum of 3 applications per season applied at 3 week intervals starting at planting, transplanting or after emergence. A good alternative is to do one soil application followed by two foliar applications after emergence.
Diluted SEA-CROP® can be used as a foliar spray. A minimum of 3 applications per season applied at 3 week intervals are recommended.
Annual Application Rates
Apply 4 gallons of SEA-CROP® concentrate per acre.
Apply 2 to 4 gallons of SEA-CROP® concentrate per acre.
Trees and Orchards:
Medium size trees (size 3-6 feet): use 4 oz. SEA-CROP® seawater concentrate per tree, not to exceed 10 gallons per acre.
Large trees (size 6-12 feet): use 6 oz of SEA-CROP® concentrate per tree, not to exceed 10 gallons per acre.
Lawns and Turf:
Apply 2 to 4 gallons per acre.
Safely handle SEA-CROP® as you would any agricultural input.
For best results, never mix SEA-CROP® with synthetic fertilizers, insecticides or herbicides. SEA-CROP® should be applied, by itself, a few days before or after other agricultural treatments. Co-application with compost tea is permissible and synergistic effects are possible.
Excellent results have been reported when SEA-CROP® has been mixed with molasses or unpasteurized milk for co-application as a soil drench. Either of these is an effective addition to aid in building up soil microflora populations and promotes rapid assimilation by soil biota of all kinds.
When using molasses, any kind will do. Just pick up the cheapest kind that you can get at the feed store. Also take care not to overdo it. If you use more than a couple of gallons per acre per year, you run the risk of turning soil bacteria into sugar junkies and that is counterproductive.
When milk is used, 2 to 3 gallons of unpasteurized milk will do the trick. Alternatively, other sugar sources such as 6 pounds to the acre of sucrose or dextrose could be used.
A good program is to only use molasses or milk with the first SEA-CROP® application each growing season.
SEA-CROP® may be used as a mineral supplement for animal nutrition. The product can be added to drinking water or food. The very low daily dosage rate is 0.02 to 0.05 milliliters per kilogram of body weight. This is approximately 1/5 to1/2 teaspoon per 100lbs.
There are no reviews yet.